ConvertXHub

Why a 1 TB Drive Shows Only 931 GB

Updated October 24, 2026

A terabyte on a drive box is 10¹² bytes. Windows reports capacity in gigabytes of 2³⁰ bytes each, and 10¹² divided by 2³⁰ is 931.32. That is the whole reason a new 1 TB drive appears in File Explorer as 931.3 GB: the box counts in powers of 1,000, Windows counts in powers of 1,024, and both call the result a gigabyte.

What the box means by a terabyte

Drive and memory-card makers use the SI prefixes as the metric system defines them: kilo is 1,000, giga is 10⁹ and tera is 10¹². A 1 TB drive holds 1,000,000,000,000 bytes, and the box or spec sheet usually says so in small print.

Software grew up differently. Memory is addressed in powers of two, and 2¹⁰ = 1,024 bytes was near enough to a thousand that programmers called it a kilobyte. The megabyte became 2²⁰ = 1,048,576 bytes and the pattern carried on upward. Windows still counts this way, so to File Explorer a gigabyte is 1,073,741,824 bytes and a terabyte is 1,099,511,627,776.

Measured in binary terabytes of 2⁴⁰ bytes, the same drive is 0.9095 TB.

Why big drives lose more

Every step up a prefix multiplies by 1,000 on one side and by 1,024 on the other, so the shortfall compounds.

One unit of each prefix in bytes, and how much smaller the binary readout looks
PrefixDecimal (box)Binary (Windows)Readout lower by
Kilo1,0001,0242.34%
Mega1,000,0001,048,5764.63%
Giga1,000,000,0001,073,741,8246.87%
Tera1,000,000,000,0001,099,511,627,7769.05%

At the kilo and mega scale the gap is only 2.34% to 4.63%, and the floppy disk blurred it further. The "1.44 MB" disk held 1,440 × 1,024 = 1,474,560 bytes, which is neither 1.44 decimal megabytes nor 1.44 binary ones. At today's sizes the gap is hard to miss: a 16 TB drive reads 1.45 TB lower than its box, more than the whole capacity of a 1 TB drive.

Advertised capacity and what an operating system that counts in binary units shows (before formatting)
On the boxBytesShown as
128 GB128,000,000,000119.2 GB
256 GB256,000,000,000238.4 GB
512 GB512,000,000,000476.8 GB
1 TB1,000,000,000,000931.3 GB
2 TB2,000,000,000,0001.819 TB
4 TB4,000,000,000,0003.638 TB
8 TB8,000,000,000,0007.276 TB
16 TB16,000,000,000,00014.55 TB

For other sizes, use the decimal terabyte to (binary) gigabyte converter, the decimal to binary terabyte converter or the decimal to binary gigabyte converter.

KiB, GiB and which programs use them

In 1998 the International Electrotechnical Commission gave the binary multiples names of their own: kibibyte (KiB) for 1,024 bytes, then mebibyte (MiB), gibibyte (GiB) and tebibyte (TiB). In those terms a 1 TB drive holds about 931 GiB, and both figures are correct because each carries an unambiguous label.

Adoption is patchy. Many Linux and technical tools print MiB and GiB, and on the command line GNU df -h counts in 1,024s while df -H counts in 1,000s. Windows shows binary values under the labels "GB" and "TB". macOS has counted in decimal since version 10.6 Snow Leopard (2009), so the same drive reads 1 TB on a Mac and 931 GB on a Windows PC.

ConvertXHub's plain kilobyte, megabyte, gigabyte and terabyte units are binary, matching how Windows (and many Linux tools) display file sizes, and the decimal versions are listed separately as "Gigabyte (10^9 bytes)" and so on. When converting a figure from a product listing, choose the decimal unit; when converting what Windows shows, choose the plain one. The guide to metric prefixes covers the decimal prefixes outside computing.

Space that is taken before you save anything

The unit mismatch accounts for the drop from 1 TB to 931 GB. If the free space is lower still, something else is using the drive.

  • The file system. Formatting writes tables, journals and indexes that take a small share of a large drive, never zero. On Linux, ext4 also reserves 5% of a new file system for the root user by default, so df shows less space available than size minus used. On a data-only drive, tune2fs -m can lower the reserve.
  • Hidden partitions. Laptops and pre-built PCs often ship with recovery and boot partitions ranging from a few hundred megabytes to tens of gigabytes. Windows Disk Management lists them; File Explorer does not.
  • The operating system. On the main drive, the system, its updates and the page or swap file are there before you save anything. A Windows PC with hibernation on also keeps a hibernation file that grows with the amount of RAM.
  • Phones and tablets. The system and preinstalled apps share storage with your photos, so a "128 GB" phone is never 128 GB free out of the box.

RAM is sold in binary

Memory is the exception on the sales side. Memory chips are built in powers of two, so a 16 GB module really holds 16 × 2³⁰ bytes and Windows reports 16 GB. Checking installed RAM never shows the 7% gap; comparing storage does.

Flash chips inside SSDs come in binary sizes too. Many SSDs sold as 512 GB contain 512 GiB of raw flash and expose 512 decimal gigabytes to the computer. The controller keeps the difference as spare area for wear leveling and replacing worn-out cells.

Estimating the number before you plug it in

Take about 7% off a decimal gigabyte figure and about 9% off a terabyte figure. A 2 TB drive shows roughly 1.8 TB (1.819 TB to four digits), and a 512 GB SSD shows about 477 GB (476.8 GB) before formatting.

File sizes follow the same rule when they come from a decimal source. A single-layer DVD is sold as 4.7 GB in decimal units. A binary readout shows that as about 4.38 GB, so a folder Windows calls 4.5 GB will not fit on one.

Download and transfer estimates bring in a second distinction, since network speeds are quoted in decimal bits rather than bytes. That calculation is in the guide to Mbps versus MB/s.

Converters used in this guide