Internet Speed: Mbps vs MB/s Explained
Updated October 24, 2026
A 100 Mbps broadband plan, a large download, and a progress bar reading 11 MB/s. That looks like a ninth of what you pay for, until you notice the two figures use different units. Providers sell speed in megabits per second; browsers and download managers usually report megabytes per second. A megabyte is eight megabits, so that plan tops out at 12.5 MB/s, and 11 is roughly what it should deliver once overhead is taken out.
One letter, eight times the size
Lowercase b is bits, uppercase B is bytes. Mb (also written Mbit) is a megabit, MB a megabyte, and adding "per second" gives Mbps or Mb/s for one and MB/s for the other. On a phone screen or in a small speed readout the difference is easy to miss.
A bit is a single 0 or 1. A byte is 8 bits, enough for one character of plain text. Files, disks and memory are counted in bytes. Network speeds are counted in bits because transmission rates have always been specified as a bit rate, the number of bits a link carries each second, whether it runs over copper, fiber or radio.
Download times at common plan speeds
To get from the plan to the progress bar, divide by 8. A gigabit plan (1,000 Mbps) moves at most 125 MB/s, and a 2 Gbps plan 250 MB/s. Plans quoted in Gbps can go straight into the gigabits to megabytes converter (decimal units).
| Speed (Mbps) | MB per second | 5 GB download |
|---|---|---|
| 10 | 1.25 | 1 h 7 min |
| 25 | 3.125 | 26 min 40 s |
| 50 | 6.25 | 13 min 20 s |
| 100 | 12.5 | 6 min 40 s |
| 300 | 37.5 | 2 min 13 s |
| 500 | 62.5 | 1 min 20 s |
| 1,000 | 125 | 40 s |
The times assume a perfect line. A 5 GB file is 40,000 megabits, so divide that by your speed in Mbps to get seconds. For a speed that is not in the table, use the megabits to megabytes converter (decimal units).
Which megabit to pick on ConvertXHub
Network speeds use decimal prefixes: a megabit is exactly 1,000,000 bits and a gigabit is 1,000,000,000 bits. Internet providers, Ethernet and Wi-Fi specifications and speed-test sites all count this way. Storage software is less consistent, and many operating systems treat a "megabyte" as 1,048,576 bytes (2²⁰).
ConvertXHub's plain "Megabit" and "Megabyte" units are the binary ones, matching how Windows (and many Linux tools) display file sizes; macOS counts in decimal. For internet speeds, choose the units labeled "Megabit (10^6 bits)" and "Megabyte (10^6 bytes)". At the mega scale the two differ by about 5%: 1 decimal megabit is 0.9537 binary megabits.
That 5% shows up in real readouts. A program that counts a megabyte as 1,048,576 bytes will display a perfect 100 Mbps download as 11.92 MB/s, not 12.5. The full story of the two systems is in why a 1 TB drive shows 931 GB.
Headers, Wi-Fi and the far end
Every packet carries addressing and error-checking data alongside the file, and typically 5–10% of the line's capacity goes on those headers. On a 100 Mbps line that leaves roughly 11–12 MB/s of actual file data, which is where the number in the opening example comes from.
Wi-Fi costs more. Distance, walls and neighbors' networks all eat into a wireless link, and a laptop two rooms from the router may see half the speed of a desktop plugged in with a cable.
The server matters too. A download can go no faster than the machine sending it, and busy servers, distant data centers and services that throttle deliberately will cap you below your plan. So will everything else in the house: a cloud backup or a console update running in the background shares the same connection, and some providers' networks slow down in the evening.
Upload is the smaller number
Cable and older DSL plans are usually asymmetric. A plan sold as "500/50" downloads at up to 500 Mbps but uploads at only 50 Mbps, or 6.25 MB/s. Pushing a 5 GB backup to the cloud at that rate takes 13 min 20 s at best, against 1 min 20 s to download the same file. Video calls and sending large files depend on this figure. Fiber plans are often symmetric.
How much a household actually uses
Streaming services publish their own recommendations, and they shift as video formats change. As a rough figure, high-definition video needs around 5 Mbps per stream and 4K around 15–25 Mbps. A video call needs a few megabits in each direction.
Add up what runs at the same time. Two 4K streams near the top of that range already take 50 Mbps before anyone joins a call. Downloads are different: they have no fixed need and take whatever capacity is left, so a big game update can make a stream in the next room stutter.
Online gaming uses little bandwidth. What it is sensitive to is latency, or ping, the delay before data arrives, and a faster plan does not reduce it.
Testing the line yourself
Speed-test sites report in Mbps, the same unit as the plan, so the numbers compare directly with no dividing. Test from a device on a cable, with other apps closed, at a few different times of day. If wired results stay well below the plan, the provider is the one to call. If wired is fine and Wi-Fi is slow, the problem is inside the home.